Alcatel-Lucent 7705 SAR-8 - Log Management Tasks

Event and Accounting Logs
7705 SAR OS System Management Guide Page 229
Log Management Tasks
This section discusses the following logging tasks:
• Modifying a Log File
• Deleting a Log File
• Modifying a File ID
• Deleting a File ID
• Deleting a Syslog ID
• Deleting a Syslog ID
• Modifying an SNMP Trap Group
• Deleting an SNMP Trap Group
• Modifying a Log Filter
• Deleting a Log Filter
• Modifying Event Control Parameters
• Returning to the Default Event Control Configuration
Modifying a Log File
Use the following CLI syntax to modify a log file:
CLI Syntax: config>log
log-id log-id
description description-string
filter filter-id
from {[main] [security] [change] [debug-trace]}
to console
to file file-id
to memory [size]
to session
to snmp [size]
to syslog syslog-id}
The following displays the current log configuration:
ALU-12>config>log>log-id# info
----------------------------------------------
...
log-id 2
description "This is a test log file."
filter 1
from main security
to file 1