Alcatel-Lucent 7705 SAR-8 - Show Commands; Table 19: Show SNMP Counters Output Fields

SNMP
7705 SAR OS System Management Guide Page 183
Show Commands
counters
Syntax counters
Context show>snmp
Description This command displays SNMP counter information. SNMP counters will continue to increase even
when SNMP is shut down. Some internal modules communicate using SNMP packets.
Output Counters Output — The following table describes SNMP counters output fields.
Table 19: Show SNMP Counters Output Fields
Label Description
in packets Displays the total number of messages delivered to SNMP from the
transport service
in gets Displays the number of SNMP get request PDUs accepted and
processed by SNMP
in getnexts Displays the number of SNMP get next PDUs accepted and processed
by SNMP
in sets Displays the number of SNMP set request PDUs accepted and
processed by SNMP
out packets Displays the total number of SNMP messages passed from SNMP to
the transport service
out get
responses
Displays the number of SNMP get response PDUs generated by SNMP
out traps Displays the number of SNMP Trap PDUs generated by SNMP
variables
requested
Displays the number of MIB objects requested by SNMP
variables set Displays the number of MIB objects set by SNMP as the result of
receiving valid SNMP set request PDUs