Event and Accounting Logs
7705 SAR OS System Management Guide Page 279
Show Commands
accounting-policy
Syntax accounting-policy [acct-policy-id] access
Context show>log
Description This command displays accounting policy information.
Parameters acct-policy-id — the policy ID that uniquely identifies the accounting policy, expressed as a decimal
integer
Values 1 to 99
access — only displays access accounting policies
Output Accounting Policy Output — The following table describes accounting policy output fields.
Table 31: Accounting Policy Output Fields
Label Description
Policy ID The identifying value assigned to a specific policy
Type Identifies the accounting record type forwarded to the configured
accounting file
access — indicates that the policy is an access accounting policy
none — indicates no accounting record types assigned
Def Yes — indicates that the policy is a default access policy
No — indicates that the policy is not a default access policy
Admin State Displays the administrative state of the policy
Up — indicates that the policy is administratively enabled
Down — indicates that the policy is administratively disabled
Oper State Displays the operational state of the policy
Up — indicates that the policy is operationally up
Down — indicates that the policy is operationally down
Intvl Displays the interval, in minutes, in which statistics are collected and
written to their destination. The default depends on the record name type.
File ID The log destination
To Next Page
Loading...
