Log Command Reference
Page 246 7705 SAR OS System Management Guide
Generic Commands
description
Syntax description string
no description
Context config>log>filter filter-id
config>log>filter filter-id>entry entry-id
config>log>log-id log-id
config>log>accounting-policy policy-id
config>log>file-id file-id
config>log>syslog syslog-id
config>log>snmp-trap-group
Description This command creates a text description stored in the configuration file for a configuration context.
The command associates a text string with a configuration context to help identify the content in the
configuration file.
The no form of the command removes the string from the configuration.
Default No text description is associated with this configuration.
Parameters string — The description can contain a string of up to 80 characters composed of printable, 7-bit
ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire string
must be enclosed within double quotes.
shutdown
Syntax [no] shutdown
Context config>log>log-id log-id
config>log>accounting-policy policy-id
Description This command administratively disables an entity. When disabled, an entity does not change, reset, or
remove any configuration settings or statistics.
The operational state of the entity is disabled as well as the operational state of any entities contained
within. Many objects must be shut down before they can be deleted.
The no form of this command administratively enables an entity.
Default no shutdown
To Next Page
Loading...
