Alcatel-Lucent 7705 SAR-8 - Deleting a Log Filter; Modifying Event Control Parameters

Event and Accounting Logs
7705 SAR OS System Management Guide Page 237
Deleting a Log Filter
Use the following CLI syntax to delete a log filter:
CLI Syntax: config>log
no filter filter-id
The following output displays the current log filter configuration:
The following displays an example of the command to delete a log filter:
Example: config>log# no filter 1
Modifying Event Control Parameters
Use the following CLI syntax to modify event control parameters:
CLI Syntax: config>log
event-control application-id [event-name | event-
number] generate[severity-level] [throttle]
event-control application-id [event-name | event-
number] suppress
The following displays the current event control configuration:
ALU-12>config>log# info
----------------------------------------------
...
event-control "atm" 2014 generate critical
...
----------------------------------------------
ALU-12>config>log#
The following displays an example of event control modifications:
Example: config# log
config>log# event-control atm 2014 suppress
The following displays the log filter configuration:
ALU-12>config>log# info
----------------------------------------------
...
event-control "atm" 2014 suppress
...
----------------------------------------------
ALU-12>config>log#