Alcatel-Lucent 7705 SAR-8 - Table 33: Event Control Output Fields

Event and Accounting Logs
7705 SAR OS System Management Guide Page 283
event-control
Syntax event-control [application [event-name | event-number]]
Context show>log
Description This command displays event control settings for events, including whether the event is suppressed or
generated and the severity level for the event.
If no options are specified, all events, alarms and traps are listed.
Parameters application — displays event control for the specified application only
Default All applications
Values atm, chassis, debug, efm_oam, filter, gsmp, ip, ldp, logger, mpls, ntp, oam, port,
ppp, qos, route_policy, security, snmp, stp, svcmgr, system, tip, tod, user, user_db,
vrtr
event-name — displays event control for the named application event only
Default All events for the application
event-number — displays event control for the specified application event number only
Default All events for the application
Output Show Event Control Output — The following table describes the output fields for the event
control.
Table 33: Event Control Output Fields
Label Description
Application The application name
ID# The event ID number within the application
L
ID# — an “L” in front of an ID represents event types that do not
generate an associated SNMP notification. Most events do generate a
notification; only the exceptions are marked with a preceding “L”.
Event Name The event name
P CL — the event has a cleared severity/priority
CR — the event has critical severity/priority
IN — the event has indeterminate severity/priority
MA — the event has major severity/priority
MI — the event has minor severity/priority
WA — the event has warning severity/priority