Event and Accounting Logs
7705 SAR OS System Management Guide Page 293
Output Show Log ID Output — The following table describes the log ID field output.
Table 38: Log ID Output Fields
Label Description
Log Id An event log destination
Source no — the event log filter is not currently in use by a log ID
yes — the event log filter is currently in use by a log ID
Filter ID The value is the index to the entry that defines the filter to be applied to
this log's source event stream to limit the events output to this log's
destination. If the value is 0, then all events in the source log are
forwarded to the destination.
Admin State Up — indicates that the administrative state is up
Down — indicates that the administrative state is down
Oper State Up — indicates that the operational state is up
Down — indicates that the operational state is down
Logged The number of events that have been sent to the log source(s) that were
forwarded to the log destination
Dropped The number of events that have been sent to the log source(s) that were
not forwarded to the log destination because they were filtered out by the
log filter
Dest. Type Console — all selected log events are directed to the system console.
If the console is not connected, then all entries are dropped.
Syslog — all selected log events are sent to the syslog address
SNMP traps — events defined as SNMP traps are sent to the
configured SNMP trap destinations and are logged in NOTIFICATION-
LOG-MIB tables
File — all selected log events are directed to a file on the CSM's
compact flash disk
Memory — all selected log events are directed to an in-memory storage
area
Dest ID The event log stream destination
To Next Page
Loading...
