Alcatel-Lucent 7705 SAR-8 - Page 292

Log Command Reference
Page 292 7705 SAR OS System Management Guide
Parameters log-id — displays the contents of the specified log file or memory log ID. The log ID must have a
destination of an SNMP or log file or a memory log for this parameter to be used.
Default Displays the event log summary
Values 1 to 99
severity severity-level — displays only events with the specified and higher severity
Default All severity levels
Values cleared, indeterminate, critical, major, minor, and warning
application application — displays only events generated by the specified application
Default All applications
Values atm, chassis, debug, efm_oam, filter, gsmp, ip, ldp, logger, mpls, ntp, oam, port,
ppp, qos, route_policy, security, snmp, stp, svcmgr, system, tip, tod, user, user_db,
vrtr
sequence from-seq [to-seq] — displays the log entry numbers from a particular entry sequence
number (from-seq) to another sequence number (to-seq). The to-seq value must be larger than the
from-seq value.
If the to-seq number is not provided, the log contents to the end of the log are displayed unless
the count parameter is present, in which case the number of entries displayed is limited by the
count.
Default All sequence numbers
Values 1 to 4294967295
count count — limits the number of log entries displayed to the number specified
Default All log entries
Values 1 to 4294967295
router-instance — specifies a router name up to 32 characters to be used in the display criteria
expression — specifies to use a regular expression as match criteria for the router instance string
subject subject — displays only log entries matching the specified text subject string. The subject is
the object affected by the event; for example, the port-id would be the subject for a link-up or
link-down event.
regexp — specifies to use a regular expression as parameters with the specified subject string
ascending | descending — specifies the log sort direction. Logs are normally shown from the newest
entry to the oldest in descending sequence number order on the screen. When using the
ascending parameter, the log will be shown from the oldest to the newest entry.
Default Descending