Event and Accounting Logs
7705 SAR OS System Management Guide Page 287
filter-id
Syntax filter-id [filter-id]
Context show>log
Description This command displays event log filter policy information. If you specify a filter ID, the command
also displays the filter match criteria.
Parameters filter-id — displays detailed information on the specified event filter policy ID
Output Event Log Filter Summary Output — The following table describes the output fields for event
log filter summary information.
Sample Output
*A:ALU-48>config>log# show log filter-id
=============================================================================
Log Filters
=============================================================================
Filter Applied Default Description
Id Action
-----------------------------------------------------------------------------
1 no forward
5 no forward
10 no forward
1001 yes drop Collect events for Serious Errors Log
=============================================================================
*A:ALU-48>config>log#
Table 35: Filter ID Summary Output Fields
Label Description
Filter Id The event log filter ID
Applied no — the event log filter is not currently in use by a log ID
yes — the event log filter is currently in use by a log ID
Default Action drop — the default action for the event log filter is to drop events not
matching filter entries
forward — the default action for the event log filter is to forward
events not matching filter entries
Description The description string for the filter ID
To Next Page
Loading...
