Alcatel-Lucent 7705 SAR-8 - Configuring RADIUS Accounting

Security
7705 SAR OS System Management Guide Page 65
Configuring RADIUS Accounting
On the local router, use the following CLI commands to configure RADIUS accounting:
CLI Syntax: config>system>security
radius
accounting
The following example displays the CLI syntax usage:
Example: config>system>security>
config>system>security# radius
config>system>security>radius# accounting
The following example displays the RADIUS accounting configuration:
ALU-1>config>system>security# info
----------------------------------------------
...
radius
shutdown
authorization
accounting
retry 5
timeout 5
server 1 address 10.10.10.103 secret "test1"
server 2 address 10.10.0.1 secret "test2"
server 3 address 10.10.0.2 secret "test3"
server 4 address 10.10.0.3 secret "test4"
exit
...
----------------------------------------------
ALU-1>config>system>security#