Security
7705 SAR OS System Management Guide Page 133
authentication
Syntax authentication [statistics]
Context show>system>security
Description This command displays system login authentication configuration and statistics.
Parameters statistics — appends login and accounting statistics to the display
Output Authentication Output — The following table describes system security authentication output
fields.
Table 8: Show System Security Authentication Output Fields
Label Description
Sequence The sequence in which authentication is processed
Server address The IP address of the RADIUS server
Status Current status of the RADIUS server
Type The authentication type
Timeout (secs) The number of seconds the router waits for a response from a RADIUS
server
Single
connection
Enabled — Specifies a single connection to the TACACS+ server
and validates everything via that connection
Disabled — The TACACS+ protocol operation is disabled
Retry count Displays the number of times the router attempts to contact the
RADIUS server for authentication if there are problems
communicating with the server
Connection
errors
Displays the number of times a user has attempted to log in
irrespective of whether the login succeeded or failed
Accepted logins The number of times the user has successfully logged in
Rejected logins The number of unsuccessful login attempts
Sent packets The number of packets sent
Rejected packets The number of packets rejected
To Next Page
Loading...
