Security Configuration Procedures
Page 56 7705 SAR OS System Management Guide
Configuring Users
Access parameters are configured for individual users. For each user, the login name and,
optionally, information that identifies the user is defined. Use the following CLI commands
to configure access parameters for users:
CLI Syntax: config>system>security
user-template template-name
user user-name
access [ftp] [snmp] [console]
console
cannot-change-password
login-exec url-prefix:source-url
member user-profile-name [user-profile-
name...(up to 8 max)]
new-password-at-login
home-directory url-prefix [directory]
[directory/directory ..]
password [password] [hash | hash2]
restricted-to-home
snmp
authentication {[none] | [[hash] {md5 key-1 |
sha key-1} privacy {none | des-key key-2}]}
group group-name
The following displays an example of the command usage.
Example: config>system>security
config>system>security# user 49ers
config>system>security>user$ access ftp snmp console
config>system>security>user$ console
config>system>security>user>console# member default ghost
config>system>security>user>console# new-password-at-
login
config>system>security>user>console# exit
config>system>security>user# password testuser1
config>system>security>user# restricted-to-home
config>system>security>user# exit
To Next Page
Loading...
