Alcatel-Lucent 7705 SAR-8 - Returning to the Default Event Control Configuration

Log Management Tasks
Page 238 7705 SAR OS System Management Guide
Returning to the Default Event Control Configuration
The no form of the event-control command returns modified values back to the default
values.
Use the following CLI syntax to return to the default event control configuration:
CLI Syntax: config>log
no event-control application [event-name | event-
number]
The following displays an example of the command usage to return to the default values:
Example: config# log
config>log# no event-control "atm" 2014
config>log# no event-control "filter" 2001
config>log# no event-control "mpls" 2001
ALU-12>config>log# info detail
----------------------------------------------
#------------------------------------------
echo "Log Configuration"
#------------------------------------------
...
event-control "atm" 2004 generate minor
event-control "atm" 2005 generate warning
event-control "atm" 2006 generate warning
event-control "atm" 2007 generate critical
event-control "atm" 2008 generate warning
event-control "atm" 2009 generate warning
event-control "atm" 2010 generate warning
event-control "atm" 2011 generate warning
event-control "atm" 2012 generate warning
event-control "atm" 2013 generate warning
event-control "atm" 2014 generate warning
event-control "atm" 2015 generate warning
event-control "atm" 2016 generate warning
event-control "atm" 2017 generate warning
...
----------------------------------------------
ALU-12>config>log#