Alcatel-Lucent 7705 SAR-8 - Figure 4: Show Log Applications Command Output

Event and Accounting Logs
7705 SAR OS System Management Guide Page 203
• Change — The change activity event source is all events that directly affect the
configuration or operation of the node. Change events are generated by the USER
application.
• Debug — The debug event source is the debugging configuration that has been
enabled on the system. Debug events are generated by the DEBUG application.
• Main — The main event source receives events from all other applications within
the 7705 SAR.
Examples of applications within the 7705 SAR include MPLS and services. Figure 4
displays an example of the
show log applications command output that displays all
applications.
Figure 4: Show Log Applications Command Output
*A:ALU-48# show log applications
==================================
Log Event Application Names
==================================
Application Name
----------------------------------
ATM
CHASSIS
DEBUG
EFM_OAM
FILTER
GSMP
IP
LDP
LOGGER
MPLS
NTP
OAM
PORT
PPP
QOS
ROUTE_POLICY
SECURITY
SNMP
STP
SVCMGR
SYSTEM
TIP
TOD
USER
USER_DB
VRTR
==================================
*A:ALU-48#