Log Command Reference
Page 296 7705 SAR OS System Management Guide
syslog
Syntax syslog [syslog-id]
Context show>log
Description This command displays syslog event log destination summary information or detailed information on
a specific syslog destination.
Parameters syslog-id — displays detailed information on the specified syslog event log destination
Values 1 to 10
Output Syslog Event Log Destination Summary Output — The following table describes the syslog
output fields.
Table 40: Syslog Output Fields
Label Description
Syslog ID The syslog ID number for the syslog destination
IP Address The IP address of the syslog target host
Port The configured UDP port number used when sending syslog messages
Facility The facility code for messages sent to the syslog target host
Severity Level The syslog message severity level threshold
Below Level
Dropped
A count of messages not sent to the syslog collector target because the
severity level of the message was above the configured severity. The
higher the level, the lower the severity.
Prefix Present Yes — a log prefix was prepended to the syslog message sent to the
syslog host
No — a log prefix was not prepended to the syslog message sent to the
syslog host
Description A text description stored in the configuration file for a configuration
context
LogPrefix The prefix string prepended to the syslog message
Log-id Events are directed to this destination
To Next Page
Loading...
