SNMP Command Reference
Page 184 7705 SAR OS System Management Guide
Sample Output
A:ALU-1# show snmp counters
==============================================================================
SNMP counters:
==============================================================================
in packets : 463
------------------------------------------------------------------------------
in gets : 93
in getnexts : 0
in sets : 370
out packets: 463
------------------------------------------------------------------------------
out get responses : 463
out traps : 0
variables requested: 33
variables set : 497
==============================================================================
A:ALU-1#
information
Syntax information
Context show>system
Description This command lists the SNMP configuration and statistics.
Output System Information Output Fields — The following table describes system information output
fields.
Table 20: Show System Information Output Fields
Label Description
System Name The name configured for the device
System Contact The text string that identifies the contact name for the device
System Location The text string that identifies the location of the device
System Coordinates The text string that identifies the system coordinates for the
device location. For example, “37.390 -122.0550" is read as
latitude 37.390 north and longitude 122.0550 west.
System Up Time The time since the last reboot
SNMP Port The port that SNMP sends responses to management requests
SNMP Engine ID The ID for either the local or remote SNMP engine to uniquely
identify the SNMPv3 node
SNMP Max Message Size The maximum size SNMP packet generated by this node
To Next Page
Loading...
