Alcatel-Lucent 7705 SAR-8 - Page 185

SNMP
7705 SAR OS System Management Guide Page 185
SNMP Admin State Enabled — SNMP is administratively enabled
Disabled — SNMP is administratively disabled
SNMP Oper State Enabled — SNMP is operationally enabled
Disabled — SNMP is operationally disabled
SNMP Index Boot
Status
Persistent — Persistent indexes was enabled at the last
system reboot
Disabled — Persistent indexes was disabled at the last
system reboot
SNMP Sync State The state when the synchronization of configuration files
between the primary and secondary CSMs finish
Telnet/SSH/FTP Admin Displays the administrative state of the Telnet, SSH, and FTP
sessions
Telnet/SSH/FTP Oper Displays the operational state of the Telnet, SSH, and FTP
sessions
BOF Source The boot location of the BOF
Image Source primary — specifies whether the image was loaded from the
primary location specified in the BOF
secondary — specifies whether the image was loaded from
the secondary location specified in the BOF
tertiary — specifies whether the image was loaded from
the tertiary location specified in the BOF
Config Source primary — specifies whether the configuration was loaded
from the primary location specified in the BOF
secondary — specifies whether the configuration was
loaded from the secondary location specified in the BOF
tertiary — specifies whether the configuration was loaded
from the tertiary location specified in the BOF
Last Booted Config
File
Displays the URL and filename of the configuration file used
for the most recent boot
Last Boot Cfg Version Displays the version of the configuration file used for the most
recent boot
Last Boot Config
Header
Displays the header information of the configuration file used
for the most recent boot
Table 20: Show System Information Output Fields (Continued)
Label Description