Alcatel-Lucent 7705 SAR-8 - Configuring SSH; Configuring Login Controls

Security
7705 SAR OS System Management Guide Page 61
Configuring SSH
Use the SSH command to configure the SSH server as SSH1, SSH2 or both. The default is
SSH2. This command should only be enabled or disabled when the SSH server is disabled.
This setting cannot be changed while the SSH server is running.
CLI Syntax: config>system>security
ssh
preserve-key
no server-shutdown
version ssh-version
Example: config>system>security# ssh
config>system>security>ssh# preserve-key
config>system>security>ssh# version 1-2
The following example displays the SSH server configuration as both SSH1 and SSH2 using
a host-key:
A:ALU-1>config>system>security>ssh# info
----------------------------------------------
preserve-key
version 1-2
----------------------------------------------
A:ALU-1>config>system>security>ssh#
Configuring Login Controls
Use the login-control context to configure parameters for console, Telnet, and FTP
sessions.
CLI Syntax: config>system
login-control
exponential-backoff
ftp
inbound-max-sessions value
telnet
inbound-max-sessions value
outbound-max-sessions value
idle-timeout {minutes | disable}
pre-login-message login-text-string [name]
login-banner
motd {url url-prefix:source-url | text motd-text-
string}