Alcatel-Lucent 7705 SAR-8 - Table 10: Show CPM Filter Output Fields

Security Command Reference
Page 136 7705 SAR OS System Management Guide
Sample Output
A:ALU-48# show system security communities
=============================================================================
Communities
=============================================================================
community access view version group name
-----------------------------------------------------------------------------
cli-readonly r iso v2c cli-readonly
cli-readwrite rw iso v2c cli-readwrite
public r no-security v1 v2c snmp-ro
-----------------------------------------------------------------------------
No. of Communities: 3
=============================================================================
A:ALU-48#
cpm-filter
Syntax cpm-filter ip-filter [entry entry-id]
Context show>system>security
Description This command displays information on CPM (CSM) filters.
If an entry number is not specified, all entries are displayed.
Parameters entry-id — displays information about the specified CPM filter entry
Default All filter entries
Values 1 to 9999
Output CPM Filter Output — The following table describes CPM filter output fields.
Table 10: Show CPM Filter Output Fields
Label Description
Entry-id Displays information about the specified CPM filter entry
Dropped The number of dropped events
Forwarded The number of forwarded events
Description The CPM filter description
Log ID The log ID where matched packets will be logged
Src. IP The source IP address(/netmask)
Dest. IP The destination IP address(/netmask)
Protocol The Protocol field in the IP header
ICMP Type The ICMP type field in the ICMP header