Security
7705 SAR OS System Management Guide Page 139
Output Management Access Filter Output — The following table describes management access filter
output fields.
Table 11: Show Management Access Filter Output Fields
Label Description
filter type The management access filter type
Def. action Permit — Specifies that packets not matching the configured
selection criteria in any of the filter entries are permitted
Deny — Specifies that packets not matching the configured selection
criteria in any of the filter entries are denied and that a ICMP host
unreachable message will be issued
Deny-host-unreachble — Specifies that packets not matching
the configured selection criteria in the filter entries are denied
Admin Status Up — indicates that the management access filter is administratively
enabled
Down — indicates that the management access filter is
administratively disabled
Entry The entry ID in a policy or filter table
Description A text string describing the filter
Src IP The source IP address used for management access filter match criteria
Src interface The interface name for the next hop to which the packet should be
forwarded if it hits this filter entry
Dest port The destination port
Protocol The IP protocol to match
Action The action to take for packets that match this filter entry
Matches The number of times a management packet has matched this filter
entry
To Next Page
Loading...
