Event and Accounting Logs
7705 SAR OS System Management Guide Page 291
Sample Output
A:ALU-1# show log log-collector
===============================================================================
Log Collectors
===============================================================================
Main Logged : 1224 Dropped : 0
Dest Log Id: 99 Filter Id: 0 Status: enabled Dest Type: memory
Dest Log Id: 100 Filter Id: 1001 Status: enabled Dest Type: memory
Security Logged : 3 Dropped : 0
Change Logged : 3896 Dropped : 0
Debug Logged : 0 Dropped : 0
===============================================================================
A:ALU-1#
log-id
Syntax log-id [log-id] [severity severity-level] [application application] [sequence from-seq [to-
seq]] [count count] [router router-instance [expression]] [subject subject [regexp]]
[ascending | descending]
Context show>log
Description This command displays an event log summary with settings and statistics or the contents of a specific
log file, SNMP log, or memory log.
If the command is specified with no command line options, a summary of the defined system logs is
displayed. The summary includes log settings and statistics.
If the log ID of a memory, SNMP, or file event log is specified, the command displays the contents of
the log. Additional command line options control what and how the contents are displayed.
Contents of logs with console, session or syslog destinations cannot be displayed. The actual events
can only be viewed on the receiving syslog or console device.
SNMP traps — events defined as SNMP traps are sent to the
configured SNMP trap destinations and are logged in NOTIFICATION-
LOG-MIB tables
File — all selected log events are directed to a file on the CSM’s
compact flash disk
Memory — all selected log events are directed to an in-memory storage
area
Table 37: Log Collector Output Fields (Continued)
Label Description
To Next Page
Loading...
