Log Command Reference
Page 294 7705 SAR OS System Management Guide
Sample Output
A:ALU-1# show log log-id
=====================================================================
Event Logs
=====================================================================
Log Source Filter Admin Oper Logged Dropped Dest Dest Size
Id Id State State Type Id
--------------------------------------------------------------------
1 none none up down 52 0 file 10 N/A
2 C none up up 41 0 syslog 1 N/A
99 M none up up 2135 0 memory 500
=====================================================================
A:ALU-1#
Sample Memory or File Event Log Contents Output
A:gal171# show log log-id 99
===============================================================================
Event Log 99
===============================================================================
Description : Default System Log
Memory Log contents [size=500 next event=3722 (wrapped)]
3721 2008/02/07 09:14:06.69 UTC WARNING: SYSTEM #2006 Base LOGGER
"Log File Id 2 configuration modified"
3720 2008/02/07 09:13:18.86 UTC WARNING: SYSTEM #2006 Base LOGGER
"Log File Id 2 configuration modified"
3719 2008/02/01 11:54:15.67 UTC MINOR: IP #2004 management PIP MANAGEMENT
"ARP information overwritten for 138.120.52.253 by 00:e0:52:d4:a5:00"
3718 2008/02/01 11:54:15.40 UTC MINOR: IP #2004 management PIP MANAGEMENT
"ARP information overwritten for 138.120.52.253 by 00:e0:5e:00:a5:00"
...
===============================================================================
A:gal171
Size The allocated memory size for the log
Time format The time format specifies the type of timestamp format for events sent to
logs where the log ID destination is either syslog or file.
When the time format is UTC, timestamps are written using the
Coordinated Universal Time value.
When the time format is local, timestamps are written in the system's
local time.
Table 38: Log ID Output Fields (Continued)
Label Description
To Next Page
Loading...
