Alcatel-Lucent 7705 SAR-8 - Page 121

Security
7705 SAR OS System Management Guide Page 121
TACACS+ Client Commands
tacplus
Syntax [no] tacplus
Context config>system>security
Description This command creates the context to configure TACACS+ authentication on the 7705 SAR.
Configure multiple server addresses for each 7705 SAR for redundancy.
The no form of the command removes the TACACS+ configuration.
accounting
Syntax accounting [record-type {start-stop | stop-only}]
no accounting
Context config>system>security>tacplus
Description This command enables TACACS+ accounting and configures the type of accounting record packet
that is to be sent to the TACACS+ server. The record-type parameter indicates whether TACACS+
accounting start and stop packets will be sent or just stop packets will be sent.
Default record-type stop-only
Parameters record-type start-stop — specifies that a TACACS+ start packet is sent whenever the user executes
a command and a stop packet is sent when the command is complete
record-type stop-only — specifies that a stop packet is sent when the command execution is
complete
authorization
Syntax [no] authorization
Context config>system>security>tacplus
Description This command configures TACACS+ authorization parameters for the system.
Default no authorization