EasyManua.ls Logo

Alcatel-Lucent 7705 SAR-8 - Page 187

Alcatel-Lucent 7705 SAR-8
304 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SNMP
7705 SAR OS System Management Guide Page 187
Sample Output
A:ALU-1# show system information
===============================================================================
System Information
===============================================================================
System Name : ALU-1
System Type : 7710 SAR-8
System Version : B-0.0.I1204
System Contact :
System Location :
System Coordinates :
System Active Slot : A
System Up Time : 1 days, 02:12:57.84 (hr:min:sec)
SNMP Port : 161
SNMP Engine ID : 0000197f00000479ff000000
SNMP Max Message Size : 1500
SNMP Admin State : Enabled
SNMP Oper State : Enabled
SNMP Index Boot Status : Not Persistent
SNMP Sync State : OK
Telnet/SSH/FTP Admin : Enabled/Enabled/Disabled
Telnet/SSH/FTP Oper : Up/Up/Down
BOF Source : cf3:
Image Source : primary
Config Source : primary
Last Booted Config File: ftp://172.22.184.249/./debby-sim1/debby-sim1-config.cfg
Last Boot Cfg Version : THU MAR 11 16:58:20 2008 UTC
Last Boot Config Header: # TiMOS-B-0.0.I1042 both/i386 Alcatel-Lucent SAR 7705
Copyright (c) 2000-2008 Alcatel-Lucent. # All rights
reserved. All use subject to applicable license
agreements. # Built on Tue Mar 11 01:26:23 PST 2008 by
builder in /rel0.0/I1042/panos/main # Generated TUE
MAR 11 16:58:20 2008 UTC
Last Boot Index Version: N/A
BOF Static Routes To — the static route destination
Next Hop — the next hop IP address used to reach the
destination
Metric — displays the priority of this static route versus
other static routes
None — no static routes are configured
ATM location ID For ATM OAM loopbacks - the address of the network device
referenced in the loopback request
Table 20: Show System Information Output Fields (Continued)
Label Description

Table of Contents

Related product manuals