Log Command Reference
Page 272 7705 SAR OS System Management Guide
security — instructs all events in the security event stream to be sent to the destination defined in the
to command for this destination log-id. The security stream contains all events that affect
attempts to breach system security such as failed login attempts, attempts to access MIB tables to
which the user is not granted access, or attempts to enter a branch of the CLI to which access has
not been granted. To limit the events forwarded to the destination, configure filters using the
filter (log destination) command.
change — instructs all events in the user activity stream to be sent to the destination configured in the
to command for this destination log-id. The change event stream contains all events that directly
affect the configuration or operation of this node. To limit the events forwarded to the change
stream destination, configure filters using the
filter (log destination) command.
debug-trace — instructs all debug-trace messages in the debug stream to be sent to the destination
configured in the to command for this destination log-id. Filters applied to debug messages are
limited to application and subject.
to console
Syntax to console
Context config>log>log-id log-id
Description This is one of the commands used to specify the log ID destination. This parameter is mandatory
when configuring a log destination.
This command instructs the events selected for the log ID to be directed to the console. If the console
is not connected, then all entries are dropped.
The source of the data stream must be specified in the from command prior to configuring the
destination with the to command.
The to command cannot be modified or re-entered. If the log destination needs to be changed or if the
maximum size of an SNMP log or memory log needs to be modified, the log ID must be removed
then recreated.
Default No destination is specified.
to file
Syntax to file log-file-id
Context config>log>log-id log-id
Description This is one of the commands used to specify the log ID destination. This parameter is mandatory
when configuring a log destination.
This command instructs the events selected for the log ID to be directed to a specified file.
To Next Page
Loading...
