Alcatel-Lucent 7705 SAR-8 - Page 58

Security Configuration Procedures
Page 58 7705 SAR OS System Management Guide
group "testgroup"
exit
exit
user "testuserA"
password "" hash2
access snmp
console
new-password-at-login
exit
snmp
authentication hash md5 e14672e71d3e96e7a1e19472527ee969 privacy
none
group "testgroup"
exit
exit
...
----------------------------------------------
ALU-12>config>system>security# info
ALU-12>config>system>security>user# info
----------------------------------------------
password "F6XjryaATzM" hash
access snmp
console
cannot-change-password
exit
snmp
authentication hash md5 e14672e71d3e96e7a1e19472527ee969 privacy none
group "testgroup"
exit
----------------------------------------------
ALU-12>config>system>security>user# exit
ALU-12>config>system>security# user testuserA
ALU-12>config>system>security>user# info
----------------------------------------------
password "" hash2
access snmp
console
new-password-at-login
exit
snmp
authentication hash md5 e14672e71d3e96e7a1e19472527ee969 privacy none
group "testgroup"
exit
----------------------------------------------
ALU-12>config>system>security>user#
Note: The cannot-change-password flag is not replicated when a copy user
command is performed. A new-password-at-login flag is created instead.