Alcatel-Lucent 7705 SAR-8 - Page 79

Security
7705 SAR OS System Management Guide Page 79
Generic Security Commands
description
Syntax description description-string
no description
Context config>system>security>management-access-filter>ip-filter>entry entry-id
config>system>security>cpm-filter>ip-filter>entry>entry-id
config>system>security>profile user-profile-name>entry entry-id
Description This command creates a text description stored in the configuration file for a configuration context.
The no form of the command removes the string.
Default No description associated with the configuration context.
Parameters description-string — the description character string. Allowed values are any string up to 80
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
shutdown
Syntax [no] shutdown
Context config>system>security>management-access-filter>ip-filter
config>system>security>cpm-filter>ip-filter
config>system>security>radius
config>system>security>tacplus
Description This command administratively disables the entity. The operational state of the entity is disabled as
well as the operational state of any entities contained within. When disabled, an entity does not
change, reset, or remove any configuration settings or statistics, other than the administrative state.
Many objects must be shut down before they can be deleted.
The no form of the command puts an entity into the administratively enabled state. Many entities
must be explicitly enabled using the no shutdown command.
Default no shutdown