Security Command Reference
Page 82 7705 SAR OS System Management Guide
Parameters app — specifies the application name
Values telnet, ftp, ssh, radius, tacplus, snmptrap, syslog, ping, traceroute, dns, sntp, ntp
ip-int-name | ip-address — specifies the name of the IP interface or IP address. If the string contains
special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
telnet-server
Syntax [no] telnet-server
Context config>system>security
Description This command enables Telnet servers running on the system.
Telnet servers are off by default. At system startup, only SSH servers are enabled.
Telnet servers in 7705 SAR networks limit a Telnet client to three retries to log in. The Telnet server
disconnects the Telnet client session after three retries.
The no form of the command disables Telnet servers running on the system.
Default no telnet-server
To Next Page
Loading...
