Alcatel-Lucent 7705 SAR-8 - Page 86

Security Command Reference
Page 86 7705 SAR OS System Management Guide
For example, to select a range from 1024 up to 2047, specify 1024 0xFC00 for value and mask.
Default 65535 (exact match)
Values 1 to 65535 (decimal)
log
Syntax [no] log
Context config>system>security>management-access-filter>ip-filter>entry entry-id
Description This command enables match logging.
The no form of this command disables match logging.
Default no log
protocol
Syntax [no] protocol protocol-id
Context config>system>security>management-access-filter>ip-filter>entry entry-id
Description This command configures an IP protocol type to be used as a management access filter match
criterion.
The protocol type is identified by its respective protocol number. Well-known protocol numbers
include ICMP (1), TCP (6), and UDP (17).
The no form of the command removes the protocol from the match criteria.
Default No protocol match criterion is specified.
Parameters protocol-id — the protocol number for the match criterion
Values 1 to 255 (decimal)
router
Syntax router router-instance
no router
Context config>system>security>management-access-filter>ip-filter>entry entry-id
Description This command configures a router name or service ID to be used as a management access filter match
criterion.
The no form of the command removes the router name or service ID from the match criteria.