Alcatel-Lucent 7705 SAR-8 - Page 99

Security
7705 SAR OS System Management Guide Page 99
tcp-ack
Syntax tcp-ack {true | false}
no tcp-ack
Context config>system>security>cpm-filter>ip-filter>entry>match
Description This command configures matching on the ACK bit being set or reset in the control bits of the TCP
header of an IP packet as an IP filter match criterion.
The no form of the command removes the criterion from the match entry.
Default no tcp-ack
Parameters true — specifies matching on IP packets that have the ACK bit set in the control bits of the TCP
header of an IP packet
false — specifies matching on IP packets that do not have the ACK bit set in the control bits of the
TCP header of the IP packet
tcp-syn
Syntax tcp-syn {true | false}
no tcp-syn
Context config>system>security>cpm-filter>ip-filter>entry>match
Description This command configures matching on the SYN bit being set or reset in the control bits of the TCP
header of an IP packet as an IP filter match criterion.
The SYN bit is normally set when the source of the packet wants to initiate a TCP session with the
specified destination IP address.
The no form of the command removes the criterion from the match entry.
Default no tcp-syn
Parameters true — specifies matching on IP packets that have the SYN bit set in the control bits of the TCP
header
false — specifies matching on IP packets that do not have the SYN bit set in the control bits of the
TCP header