Alcatel-Lucent 7750 SR-a4 - 6-Port 10 Gige SFP+ and 1-Port 40 Gige QSFP+ Combo MDA-Axp Leds; Power Consumption; Table 73 6-Port 10 Gige SFP+ and 1-Port 40 Gige QSFP+ Combo MDA-Axp Specifications; Table 74 6-Port 10 Gige SFP+ and 1-Port 40 Gige QSFP+ Combo MDA-Axp Power Consumption Values in Watts

6-Port 10GigE SFP+ and 1-Port 40GigE QSFP+ Combo MDA-aXP
158 7750 SR-a4 and SR-a8 Installation Guide
Technical Specifications
Power Consumption
Table 74 lists the power consumption values for the 6-Port 10GigE SFP+ and 1-Port 40GigE
QSFP+ Combo MDA-aXP.
Note:
1. Idle: Slots not configured or provisioned
2. Zero Traffic: Traffic load: 0% line rate at 25ºC (reset case)
3. Typical: Traffic load: 50% line rate with Internet mix (IMIX) at 25ºC
4. Worst Case: Traffic Load: 100% line rate with IMIX at the maximum short duration and at a high temperature
(65ºC)
6-Port 10GigE SFP+ and 1-Port 40GigE QSFP+ Combo
MDA-aXP LEDs
Figure 52 shows the 6-Port 10GigE SFP+ and 1-Port 40GigE QSFP+ Combo MDA-aXP.
Table 75 describes the LEDs.
Table 73: 6-Port 10GigE SFP+ and 1-Port 40GigE QSFP+ Combo MDA-aXP
Specifications
Parameter Description
Dimensions (H x W x D) 1.4 x 7.6 x 9.0 in. (3.56 x 19.30 x 22.86 cm)
Weight 2.11 lb (0.96 kg)
Table 74: 6-Port 10GigE SFP+ and 1-Port 40GigE QSFP+ Combo MDA-aXP Power
Consumption Values in Watts
Idle
1
Zero Traffic
2
Typical
3
Maximum Power
4
0 405272