Unpacking the Chassis
74 7750 SR-a4 and SR-a8 Installation Guide
Step 5. Remove the protective antistatic wrapping when you are ready to install the chassis.
Accessories
Table 34 lists the contents of the accessories kit.
Caution: There are no handles or hand grips on the 7750 SR-a chassis. Lift the chassis by
its rack mounting brackets. Do not put your hands inside the chassis.
Table 34: Accessories List
Quantity Accessory
1Console cable
2 10-32 KEP nuts for ground lug
1 45-degree ground lug
2 Wire-form cable guide specific to the chassis size
2 ETSI bracket specific to the chassis size, to accommodate the 535-mm
mounting width aperture of the ETSI 600 mm wide by 300 mm deep rack
8 12-24 Phillips screws for adapter brackets for ETSI rack
1 ESD wrist strap
To Next Page
Loading...
