Alcatel-Lucent 7750 SR-a4 - Removing an IOM-A

Removing and Replacing an IOM-a
200 7750 SR-a4 and SR-a8 Installation Guide
Continue port configurations as required.
Removing an IOM-a
Figure 73 shows how to remove an IOM-a from slot 3 in the 7750 SR-a4 chassis. Table 101
describes the features. The same method applies to the IOM-a in slots 3 and 6 in the
7750 SR-a8 chassis.
Step 1. card slot-number card 1
Step 2. card-type card-type card-type iom-a
Step 3. no shutdown no shutdown
Configure the MDA slot and type:
Step 4. mda slot-number mda 1
Step 5. mda mda-type mda maxp1-100gb-cfp
Step 6. no shutdown no shutdown
Step 7. mda slot-number mda 2
Step 8. mda mda-type mda ma4-10gb-sfp+
Step 9. no shutdown no shutdown
Configure port:
Step 10. port port-id port 1/1
Step 11. no shutdown no shutdown
Step 12. exit exit
Command Syntax Example