Alcatel-Lucent 7750 SR OS - Page 147

IP Router Configuration
7750 SR OS Router Configuration Guide Page 147
Sample Output
A:Dut-A# show router rtr-advertisement
=======================================================================
Router Advertisement
=======================================================================
-------------------------------------------------------------------------------
Interface: interfaceNetworkNonDefault
-------------------------------------------------------------------------------
Rtr Advertisement Tx : 8 Last Sent : 00h01m28s
Nbr Solicitation Tx : 83 Last Sent : 00h00m17s
Nbr Advertisement Tx : 74 Last Sent : 00h00m25s
Rtr Advertisement Rx : 8 Rtr Solicitation Rx : 0
Nbr Advertisement Rx : 83 Nbr Solicitation Rx : 74
-------------------------------------------------------------------------------
Max Advert Interval : 601 Min Advert Interval : 201
Managed Config : TRUE Other Config : TRUE
Reachable Time : 00h00m00s400ms Router Lifetime : 00h30m01s
Retransmit Time : 00h00m00s400ms Hop Limit : 63
Link MTU : 1500
Prefix: 211::/120
Autonomous Flag : FALSE On-link flag : FALSE
Max Advert Inter-
val
The maximum interval between sending router advertisement messages.
Managed Config
True — Indicates that DHCPv6 has been configured.
False — Indicates that DHCPv6 is not available for address configura-
tion.
Reachable Time
The time, in milliseconds, that a node assumes a neighbor is reachable
after receiving a reachability confirmation.
Retransmit Time
The time, in milliseconds, between retransmitted neighbor solicitation
messages.
Link MTU
The MTU number the nodes use for sending packets on the link.
Rtr Solicitation
Rx
The number of router solicitations received and time since they were
received.
Nbr Solicitation
Rx
The number of neighbor solicitations received and time since they were
received.
Min Advert Inter-
val
The minimum interval between sending ICMPv6 neighbor discovery
router advertisement messages.
Other Config
True — Indicates there are other stateful configurations.
False — Indicates there are no other stateful configurations.
Router Lifetime
Displays the router lifetime in seconds.
Hop Limit
Displays the current hop limit.
Label Description (Continued)