Alcatel-Lucent 7750 SR OS - Creating Filter Log Policies

Filter Policies
7750 SR OS Router Configuration Guide Page 323
Creating Filter Log Policies
Use the following CLI syntax to configure filter log policy:
CLI Syntax: config>filter>log log-id
description description-string
destination memory num-entries
destination syslog syslog-id
no shutdown
summary
no shutdown
summary-crit dst-addr
summary-crit src-addr
wrap-around
The following displays the command usage to configure a filter log policy.
Example:config>filter# log 101 create
config>filter>log# description "Test filter log"
config>filter>log# destination memory 1000
config>filter>log# wraparound
config>filter>log# no shutdown
The following displays the filter matching configuration.
A:ALA-48>config>filter>log# info detail
---------------------------------------------
description "Test filter log."
destination memory 1000
wrap-around
no shutdown
---------------------------------------------
A:ALA-48>config>filter>log#