Alcatel-Lucent 7750 SR OS - Modifying a Redirect Policy

Filter Policies
7750 SR OS Router Configuration Guide Page 347
Modifying a Redirect Policy
To access a specific redirect policy, you must specify the policy name. Use the no form of the
command to remove the command parameters or return the parameter to the default setting.
Example: config>filter# redirect-policy redirect1
config>filter>redirect-policy# description "New redirect info"
config>filter>redirect-policy# destination 10.10.10.106
config>filter>redirect-policy>dest# no url-test "URL_to_106"
config>filter>redirect-policy>dest# url-test "URL_to_Proxy"
config>filter>redirect-policy>dest>url-test$ url http://
www.alcatel.com
config>filter>redirect-policy>dest>url-test# interval 10
config>filter>redirect-policy>dest>url-test# timeout 10
config>filter>redirect-policy>dest>url-test# return-code 1
4294967295 raise-priority 255
A:ALA-7>config>filter# info
----------------------------------------------
...
redirect-policy "redirect1" create
description "New redirect info"
destination 10.10.10.104 create
description "SNMP_to_104"
priority 105
snmp-test "SNMP-1"
interval 30
drop-count 30 hold-down 120
exit
no shutdown
exit
destination 10.10.10.105 create
priority 95
ping-test
timeout 30
drop-count 5
exit
no shutdown
exit
destination 10.10.10.106 create
priority 90
url-test "URL_to_Proxy"
url "http://www.alcatel.com"
interval 10
timeout 10
return-code 1 4294967295 raise-priority 255
exit
no shutdown
exit
no shutdown
exit
...
----------------------------------------------
A:ALA-7>config>filter#