Alcatel-Lucent 7750 SR OS - Apply IP and MAC Filter Policies; Applying Filter Policies

Common Configuration Tasks
Page 324 7750 SR OS Router Configuration Guide
Applying Filter Policies
Filter policies can be associated with the following entities:
Apply IP and MAC Filter Policies
The following example shows an example of applying an IP and a MAC filter policy to an Epipe
service:
CLI Syntax: config>service# epipe service-id
sap
sap-id
egress
filter {ip
ip-filter-id | mac-filter-id}
ingress
filter {ip
ip-filter-id | mac-filter-id}
spoke-sdp sdp-id:vc-id [vc-type {ether|vlan}]
egress
filter {ip
ip-filter-id | mac-filter-id}
ingress
filter {ip
ip-filter-id | mac-filter-id}
The following displays the command usage to assign IP filters to a service SAP and spoke SDP:
Example: config# service epipe 103
config>service>epipe# sap 1/1/1.1.1
config>service>epipe>sap# ingress
config>service>epipe>sap>ingress# filter ip 10
config>service>epipe>sap>ingress# exit
config>service>epipe>sap# egress
config>service>epipe>sap>egress# filter mac 92
config>service>epipe>sap>egress# exit
config>service>epipe>sap# exit
Table 19: Applying Filter Policies
IP Filter MAC Filter IPv6 Filter
Epipe SAP, spoke SDP Epipe SAP, spoke SDP N/A
Fpipe SAP, spoke SDP N/A N/A
IES interface SAP N/A IES interface SAP
Ipipe SAP, spoke SDP N/A N/A
VPLS mesh SDP, spoke SDP,
SAP
VPLS mesh SDP, spoke SDP,
SAP
N/A
VPRN interface SAP, spoke
SDP
N/A N/A