Alcatel-Lucent 7750 SR OS - From the Filter Configuration

Filter Management Tasks
Page 346 7750 SR OS Router Configuration Guide
From the Filter Configuration
After you have removed the filter from the SAP, use the following CLI syntax to delete the filter.
CLI Syntax: config>filter# no ip-filter filter-id
CLI Syntax: config>filter# no mac-filter filter-id
CLI Syntax: config>filter# no ipv6-filter filter-id
Example
: config>filter# no ip-filter 11
config>filter# no mac-filter 13
config>filter# no ipv6-filter 100