Alcatel-Lucent 7750 SR OS - Router Interface VRRP Non-Owner

Configuring VRRP Policy Components
Page 216 7750 SR OS Router Configuration Guide
Router Interface VRRP Non-Owner
Use the CLI syntax displayed below to configure non-owner router interface VRRP
parameters:
CLI Syntax: config>router
interface ip-int-name
address ip-addr/mask-length
no shutdown
vrrp vrid
authentication-type {password}
authentication-key [authentication-key | hash-key]
[hash|hash2]
backup ip-addr
init-delay seconds
mac ieee-mac-address
priority base-priority
policy vrrp-policy-id
message-interval seconds
ping-reply
telnet-reply
ssh-reply
no shutdown
The following example displays router interface non-owner VRRP configuration command
usage:
Example: config>router# interface "lucy"
config>router>if# address 10.20.30.40/24
config>router>if# secondary 10.10.50.1/24
config>router>if# secondary 10.10.60.1/24
config>router>if# secondary 10.10.70.1/24
config>router>if# no shutdown
config>router>if# vrrp 1
config>router>if>vrrp# backup 10.10.50.2
config>router>if>vrrp# backup 10.10.60.2
config>router>if>vrrp# backup 10.10.70.2
config>router>if>vrrp# backup 10.20.30.41
config>router>if>vrrp# ping-reply
config>router>if>vrrp# telnet-reply
config>router>if>vrrp# authentication-type password
config>router>if>vrrp# authentication-key testabc
config>router>if>vrrp# no shutdown