Alcatel-Lucent 7750 SR OS - Basic Configuration

Basic Configuration
Page 48 7750 SR OS Router Configuration Guide
Basic Configuration
NOTE: Refer to each specific chapter for specific routing protocol information and command
syntax to configure protocols such as OSPF and BGP.
The most basic router configuration must have the following:
• System name
• System address
The following example displays a router configuration:
A:ALA-A> config# info
. . .
#------------------------------------------
# Router Configuration
#------------------------------------------
router
interface "system"
address 10.10.10.103/32
exit
interface "to-104"
address 10.0.0.103/24
port 1/1/1
exit
exit
autonomous-system 100
confederation 1000 members 100 200 300
router-id 10.10.10.103
. . .
exit
isis
exit
. . .
#------------------------------------------
A:ALA-A> config#