VRRP
7750 SR OS Router Configuration Guide Page 221
Modifying Service and Interface VRRP Parameters
Modifying Non-Owner Parameters
Once a VRRP instance is created as non-owner, it cannot be modified to the owner state. The
vrid must be deleted and then recreated with the owner keyword to invoke IP address
ownership.
Modifying Owner Parameters
Once a VRRP instance is created as owner, it cannot be modified to the non-owner state. The
vrid must be deleted and then recreated without the owner keyword to remove IP address
ownership.
Entering the
owner keyword is optional when entering the vrid for modification purposes.
Deleting VRRP on an Interface or Service
The vrid does not need to be shutdown to remove the virtual router instance from an interface
or service.
Example: config>router#interface
config>router# interface lucy
config>router>if# shutdown
config>router>if# exit
config>router# no interface lucy
config>router#
The following example displays the command usage to delete a VRRP instance from an
interface or IES service:
Example: config>service#ies 10
config>service>ies# interface “test”
config>service>ies>if# vrrp 1
config>service>ies>if>vrrp# shutdown
config>service>ies>if>vrrp# exit
config>service>ies>if# no vrrp 1
config>service>ies>if# exit all
To Next Page
Loading...
