Page 450 7750 SR OS Router Configuration Guide
Configuring Global Cflowd Parameters
The following cflowd parameters apply to all instances where cflowd (traffic sampling) is enabled.
Use the following CLI commands to configure cflowd parameters:
CLI Syntax: config>cflowd#
active-timeout minutes
cache-size num-entries
inactive-timeout seconds
overflow percent
rate sample-rate
no shutdown
The following example displays cflowd configuration command usage:
Example: config>cflowd# active-timeout 20
config>cflowd# inactive-timeout 10
config>cflowd# overflow 10
config>cflowd# rate 100
The following example displays the common cflowd component configuration:
ALA-1>config>cflowd# info
#------------------------------------------
active-timeout 20
inactive-timeout 10
overflow 10
rate 100
#------------------------------------------
ALA-1>config>cflowd#
To Next Page
Loading...
