Alcatel-Lucent 7750 SR OS - Apply an Ipv6 Interface

Common Configuration Tasks
Page 328 7750 SR OS Router Configuration Guide
Apply an IPv6 Interface
Use the following CLI syntax to apply an IPv6 filter policy to a network IP interface:
CLI Syntax: config>router# interface ip-int-name
egress
filter ipv6 ipv6-filter-id
ingress
filter ipv6 ipv6-filter-id
Example
: config>router# interface ipv6-test
config>router>if# ingress filter ipv6 1
config>router>if# egress filter ipv6 1
config>router>if# ingress filter ip 2
config>router>if# egress filter ip 2
A:config>router>if# info
----------------------------------------------
port 1/1/1
ipv6
address 3FFE::101:101/120
exit
ingress
filter ip 2
filter ipv6 1
exit
egress
filter ip 2
filter ipv6 1
exit
----------------------------------------------
A:config>router>if#