Alcatel-Lucent 7750 SR OS - Configuring Cflowd

Page 448 7750 SR OS Router Configuration Guide
Configuring Cflowd
Use the CLI syntax displayed below to perform the following tasks:
• Enabling Cflowd on page 449
• Configuring Global Cflowd Parameters on page 450
• Configuring Cflowd Collectors on page 451
• Enabling Cflowd on Interfaces and Filters on page 453
CLI Syntax: config>cflowd#
active-timeout minutes
cache-size num-entries
inactive-timeout seconds
overflow percent
rate sample-rate
collector ip-address[:port]
aggregation
as-matrix
destination-prefix
protocol-port
raw
source-destination-prefix
source-prefix
autonomous-system-type [origin | peer]
description description-string
no shutdown
no shutdown