Alcatel-Lucent 7750 SR OS - Modifying an Ipv6 Filter Policy

Filter Management Tasks
Page 340 7750 SR OS Router Configuration Guide
Modifying an IPv6 Filter Policy
To access a specific IPv6 filter, you must specify the filter ID. Use the no form of the command to
remove the command parameters or return the parameter to the default setting.
Example:config>filter# ipv6-filter 11
config>filter>ipv6-filter# description "IPv6 filter for Customer
1"
config>filter>ipv6-filter# scope exclusive
config>filter>ipv6-filter# entry 1
config>filter>ipv6-filter>entry# description "Fwds matching
packets"
config>filter>ipv6-filter>entry# action forward
config>filter>ipv6-filter>entry# exit
The following output displays the modified IPv6 filter output:
A:ALA-49>config>filter>ipv6-filter# info
----------------------------------------------
description "IPv6 filter for Customer 1"
scope exclusive
entry 1 create
description "Fwds matching packets"
match
dst-ip 11::12/128
src-ip 13::14/128
exit
action forward
exit
----------------------------------------------
A:ALA-49>config>filter>ipv6-filter#