Alcatel-Lucent 7750 SR OS - VRRP Configuration Management Tasks; Modifying a VRRP Policy

VRRP
7750 SR OS Router Configuration Guide Page 219
VRRP Configuration Management Tasks
This section discusses the following VRRP configuration management tasks:
• Modifying a VRRP Policy on page 219
• Deleting a VRRP Policy on page 220
• Modifying Service and Interface VRRP Parameters on page 221
→ Modifying Non-Owner Parameters on page 221
→ Modifying Owner Parameters on page 221
→ Deleting VRRP on an Interface or Service on page 221
Modifying a VRRP Policy
To access a specific VRRP policy, you must specify the policy ID. To display a list of VRRP
policies, use the
show vrrp policy command.
Example: config>vrrp#
config>vrrp# policy 1
config>vrrp>policy# priority-event
config>vrrp>policy>priority-event# port-down 1/1/3
config>vrrp>policy>priority-event>port-down$ priority 200
explicit
config>vrrp>policy>priority-event>port-down# exit
config>vrrp>policy>priority-event# host-unreachable
10.10.24.4
config>vrrp>policy>priority-event>host-unreachable$ drop-
count 25
The following example displays the modified VRRP policy configuration:
A:SR2>config>vrrp>policy# info
----------------------------------------------
delta-in-use-limit 50
priority-event
port-down 1/1/2
hold-set 43200
priority 100 delta
exit
port-down 1/1/3
priority 200 explicit
exit
host-unreachable 10.10.24.4
drop-count 25
exit
exit
----------------------------------------------
A:SR2>config>vrrp>policy#