Page 446 7750 SR OS Router Configuration Guide
Basic Cflowd Configuration
This section provides information to configure cflowd and configuration examples of common
configuration tasks. In order to sample traffic, the minimal cflowd parameters that need to be
configured are:
• Cflowd must be enabled.
• At least one collector must be configured and enabled.
• Sampling must be enabled on either:
→ An IP filter entry and applied to a service or an port.
→ An interface applied to a port.
The following example displays a cflowd configuration.
ALA-1>config>cflowd# info detail
----------------------------------------------
active-timeout 30
cache-size 65536
inactive-timeout 15
overflow 1
rate 1000
collector 10.10.10.103:5
no aggregation
autonomous-system-type origin
no description
no shutdown
exit
no shutdown
----------------------------------------------
ALA-1>config>cflowd#
To Next Page
Loading...
