Alcatel-Lucent 7750 SR OS - Cflowd Configuration Management Tasks

Page 458 7750 SR OS Router Configuration Guide
Cflowd Configuration Management Tasks
This section discusses the following cflowd configuration management tasks:
• Modifying Global Cflowd Components on page 459
• Modifying Cflowd Collector Parameters on page 460
Use the following CLI syntax to modify cflowd parameters.
CLI Syntax: config>cflowd
active-timeout minutes
no active-timeout
cache-size num-entries
no cache-size
[no] collector ip-addr[:port]
[no] aggregation
[no] as-matrix
[no] destination-prefix
[no] protocol-port
[no] raw
[no] source-destination-prefix
[no] source-prefix
autonomous-system-type {origin | peer}
no autonomous-system-type
description description-string
no description
[no] shutdown
inactive-timeout seconds
no inactive-timeout
overflow percent
no overflow
rate sample-rate
no rate
[no] shutdown