Alcatel-Lucent 7750 SR OS - From a Network Interface

Filter Policies
7750 SR OS Router Configuration Guide Page 343
From a Network Interface
To delete a filter from a network interface, enter the following CLI commands:
CLI Syntax: config>router# interface ip-int-name
ingress
no filter
Example
: config>router# interface 11
config>router>if# shutdown
config>filter>if# exit
config>filter# no interface 11
IP and IPv6 filters can be assigned and deleted together or separately. To delete both IP and IPv6
filter associations, consider the following examples:
A:ALA-49>config>router>if# info
----------------------------------------------
port 1/1/1
ipv6
address 3FFE::101:101/120
exit
ingress
filter ip 2
filter ipv6 1
exit
egress
filter ip 2
filter ipv6 1
exit
----------------------------------------------
A:ALA-49>config>router>if#
CLI Syntax: config>router>if#
config>router>if# ingress no filter
A:ALA-49>config>router>if# info
----------------------------------------------
port 1/1/1
ipv6
address 3FFE::101:101/120
exit
egress
filter ip 2
filter ipv6 1
exit
----------------------------------------------
A:ALA-49>config>router>if#