Alcatel-Lucent 7750 SR OS - Modifying Global Cflowd Components

Cflowd
7750 SR OS Router Configuration Guide Page 459
Modifying Global Cflowd Components
Cflowd parameter modifications apply to all instances where cflowd or traffic sampling is enabled.
Changes are applied immediately.
Use the following cflowd commands to modify global cflowd parameters:
CLI Syntax: config>cflowd#
active-timeout minutes
[no] active-timeout
cache-size num-entries
[no] cache-size
inactive-timeout seconds
[no] inactive-timeout
overflow percent
[no] overflow
rate sample-rate
[no] rate
[no] shutdown
The following example displays the cflowd command usage to modify configuration parameters:
Example: config>cflowd# active-timeout 60
config>cflowd# no inactive-timeout
config>cflowd# overflow 2
config>cflowd# rate 10
The following example displays the common cflowd component configuration:
ALA-1>config>cflowd# info
#------------------------------------------
active-timeout 60
overflow 2
rate 10
#------------------------------------------
ALA-1>config>cflowd#